Harrison Cameras

Kaiser RB 560 AL LED照明ユニット

Kaiser RB 560 AL LED照明ユニット - Main image
$2078.99 $3299.99 In stock

Category: アナログ写真 - 暗室設備

RB 560 ALは、精密にマッチングされた2つのLEDライトバンクにより、柔らかく均一な照明を実現します。R1およびRDシステムのプロフェッショナルコピースタンドに最適で、正確な再現のための一貫した高品質な照明を提供します。

先進のLEDテクノロジー

各ライトバンクには厳選された白色SMD LEDを272個搭載し、色温度は5600 K、CRIは96です。光はフリッカーがなく、赤外線や紫外線の放射もなく、10 %から100 %まで1 %刻みで個別または同期して調光できます。

熱管理

統合されたサーマルマネジメントにより、室温やユニット温度に関係なく、一定の明るさと色温度を維持します。動的補正を備えたセンサー制御の温度監視と、パッシブアルミニウム冷却を組み合わせることで、再現性のある結果を確保し、LEDの寿命を延ばします。

精密な照明

マッチングされたライトパネルが、対称的な配置で均一な照明を作り出します。照明付きインフォスクリーンとメモリー機能を備え、電源投入時に前回の明るさ設定を呼び出します。取り外し可能なソフトスクリーンにより、柔軟な照明調整が可能です。

デザインと柔軟性

頑丈なアルマイトアルミニウムハウジングは高さ調整可能で、回転および移動ができ、デテントとマーキング付きの垂直アームに取り付けられています。強力なダイキャストクランプベース(最大48 mm)が確実な取り付けを提供します。

仕様

  • LEDアレイ:2 × 272 SMD LED、5600 K、CRI = 96、100°角度
  • 最大照度:6800 lux(ソフトスクリーン付き)、8000 lux(なし)
  • 電力:≤ 2 × 40 W、24 V動作
  • パネルサイズ:58 × 16.5 cm
  • 垂直アーム:76 cm、20 × 20 mm
  • 電源アダプター:100~240 V入力、24 V/4 A出力、2.5 mリード
ご購入の最終確認

利用可能な支払方法と最終金額は購入手続きで表示されます。

注文の準備

注文の処理時間と配送時間の両方を見込んでください。

Standard Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

Express Shipping: 出荷準備(営業日) 0–1; 輸送(営業日) 7–15.

規定を見る
返金のご依頼

返金については注文番号を添えて店舗にお問い合わせください。

返送前に返金処理期間をご確認ください。

規定を見る
配送の手配

お届け先と選択した配送方法の料金をご確認ください。

Standard Shipping · アメリカ合衆国: $0.00

Express Shipping · アメリカ合衆国: $3.99

規定を見る
返品を手配する前に

返送する前に適用される返品条件をご確認ください。

アメリカ合衆国 · 返品期限(受取後の日数): 30. 返品方法: 郵送. 返品送料: 販売者負担.

規定を見る

Customer Reviews (4.6 / 5 · 5 reviews)

Violet ★★★★★

Mounting this under my copy stand was effortless, and the two light banks give me perfectly even illumination across the entire frame — no hot spots at all. Finally, I can shoot consistent negatives without fighting shadows or reflections.

Sofia P. ★★★★★

The LED light banks are perfectly matched, giving me even illumination across my copy stand without any hot spots. Color accuracy is spot-on for my film digitization work, and the soft light really reduces glare on glossy prints. Exactly what I needed for consistent darkroom results.

Hannah K. ★★★★★

Setup took me less than five minutes, and the twin LED banks throw such even light that my negatives finally look consistent across the whole frame. The softness is genuinely noticeable compared to my old halogen setup, and it stays cool even after an hour of printing.