Baby Arrival Countdown Frame: How to Use It Before the Big Day
By Harrison Cameras | Published: 2026-11-04
Category: Handleidingen
Set up a baby arrival countdown frame week by week, from inserting the scan photo to hanging the numbered tiles and storing the keepsake after birth.
Quick answer
Treat the frame as a weekly ritual: load the scan photo once, then move the numbered tile each week and hang the frame out of a child's reach. That keeps the countdown accurate, protects the photo and gives you a ready-made new baby keepsake when the countdown ends.
Why the weekly tile matters more than the photo
The scan photo is fixed, but the numbered tiles are the part you interact with, so the frame stays useful only if the number changes on a predictable day. Pick a day you already mark, such as a scan anniversary or the start of each pregnancy week, and change the tile then.
A baby countdown plaque works best when it shows one clear number. Resist the urge to display several tiles at once to show a range; it muddies the message and makes the frame harder to read from across the nursery.
Where to hang it so it survives to the birth
The frame has two hooks above the aperture for the numbered tiles, so it is designed to be handled rather than sealed away. That makes placement a safety decision as much as a decorating one: keep it high enough that a toddler cannot reach the loose numbers, and away from a cot where a fall could matter.
Nursery countdown signs also fade or warp in direct sun and damp. A wall opposite the window, or a shelf back from a radiator, keeps the grey finish and the photo looking right for the months ahead.
The keepsake step people skip
Most parents stop using the frame the day the baby arrives, which wastes the keepsake value. Before you pack away the pregnancy items, set the frame to the birth week or the day itself, photograph it, and store the spare tiles in a small bag taped to the back. When you later want a new baby keepsake, the full set is still together rather than scattered in a drawer.
Setting up and running the countdown, step by step
- Print the scan to fit the aperture: Measure the rectangular aperture before ordering a print, then trim the scan photo to sit flat behind it. Common mistake: printing a standard photo size and forcing it in, which creases the image or bows the frame. Check the aperture measurement first; a print that is slightly too large is easier to trim than one that is too small.
- Choose your changeover day: Decide which day each week you will move the numbered tile, and write it on a calendar or phone reminder. Common mistake: changing the number whenever you remember, so the countdown drifts and stops matching your due date frame. One fixed day per week keeps the countdown honest.
- Hang the frame at the right height: Fix the frame so the aperture is at eye level for an adult standing, and well above a toddler's reach. Common mistake: hanging it low over a changing table where small hands can pull the numbered tiles off the hooks. If you cannot reach the top hooks comfortably, it is too high to update weekly.
- Set the first number and photograph it: Hang the tile for the current number of weeks remaining, then take a phone photo of the frame as a record. Common mistake: skipping the photo, which means you lose the starting point of the pregnancy countdown frame. A dated photo turns the frame into a documented timeline, not just decor.
- Move the tile each week and check the photo: On your chosen day, swap the numbered tile and glance at the scan photo to confirm it has not slipped. Common mistake: only looking at the number, so a photo that has slid behind the frame goes unnoticed for weeks. Two seconds of checking the photo saves a reprint later.
- Retire it as a new baby keepsake: When the baby arrives, set the frame to the birth week or day, photograph it, and bag the spare numbered tiles behind the frame. Common mistake: losing the loose tiles, which makes the set incomplete if you later pass it on or display it again. Store the tiles with the frame, not in a general nursery drawer.
Product facts
- Baby Arrival Countdown Frame: The BAMBINO BY JULIANA® frame has a rectangular aperture sized for baby scan photos and includes numbered tiles for a weekly countdown. You can plan the scan print size and the weekly tile routine before the frame arrives, rather than improvising once it is on the wall.
Baby Arrival Countdown Frame
