Start with the run, not the spec sheet
Most camera HDMI buying mistakes happen before anyone looks at resolution. The cable has to physically reach from your camera's full-size HDMI port to the monitor, recorder or transmitter, and it has to do that without a loop of slack pulling on the connector. Measure that route first, then choose a cable built for it.
Two cables in the Harrison Cameras catalog show how different those routes can be. The SmallRig 2956B is a 35cm ultra-slim HDMI 2.0 cable aimed at camera rigs. The Ricoh HC-1 is a dedicated cable for the GR II, where the camera body itself sets the terms.
When a short, slim cable is the right answer
On a cage, gimbal or compact rig, a long cable is a liability. It snags, it loops into the frame, and it puts leverage on a small port. The SmallRig 2956B addresses that with a 35cm length and a 3.6mm outer diameter, which is thinner and more flexible than a standard HDMI cable. The compact connectors are also shaped not to obstruct adjacent ports, so you can keep other accessories plugged in.
That combination suits short runs between a camera and an external monitor, recorder or wireless video transmitter. It is not a cable for reaching across a room; the supplied information describes it as ideal for short cable runs, and 35cm is exactly that.
What the SmallRig 2956B confirms
- SmallRig 2956B Ultra Slim 4K HDMI Cable (35cm): HDMI 2.0 cable supporting resolutions up to 4K at 60Hz, backwards compatible with earlier HDMI standards. Resolution and refresh headroom are stated, so you can match it to a 4K monitor or recorder rather than guessing.

SmallRig 2956B Ultra Slim 4K HDMI Cable (35cm) - SmallRig 2956B Ultra Slim 4K HDMI Cable (35cm): 35cm length with a 3.6mm cable diameter and low-profile connectors that won't block adjacent ports. This is the fit decision: short rig runs and crowded port panels are where the cable earns its place.
- SmallRig 2956B Ultra Slim 4K HDMI Cable (35cm): Compatible with devices featuring a full-size HDMI connection, including listed cameras such as the Blackmagic Pocket Cinema Camera 4K and 6K, Panasonic Lumix GH5 and S1H, Z CAM E2, Atomos Ninja V and Hollyland Mars 400. The connector type is full-size HDMI, so check your camera and monitor ports before ordering.
- SmallRig 2956B Ultra Slim 4K HDMI Cable (35cm): Includes a reusable cable tie. A small practical detail for keeping slack secured on a rig.
The GR II is a different problem entirely
The Ricoh GR II is a compact camera, and the Ricoh HC-1 HDMI Cable is designed specifically for it. The supplied information describes it as a cable for linking the GR II directly to an HDMI-compatible device for full HD audio and video playback on a larger screen. That is a playback and viewing cable, not a general-purpose rig cable.
If you shoot with a GR II and want to show images or footage on a TV or larger display, the HC-1 is the matching accessory. If you are building a monitor rig around a different camera, the HC-1's camera-specific design makes it the wrong starting point. Do not assume it will behave like a generic HDMI cable for other bodies.
What the Ricoh HC-1 confirms
- Ricoh HC-1 HDMI Cable for GR II: Designed for the Ricoh GR II digital camera. Compatibility is model-specific, so confirm you have a GR II before buying.

Ricoh HC-1 HDMI Cable for GR II - Ricoh HC-1 HDMI Cable for GR II: Links the camera to any HDMI-compatible device for full HD audio and video playback on larger screens. The intended use is playback and viewing, which sets expectations for how you will use it.
SmallRig 2956B vs Ricoh HC-1: where the choice turns
- Camera fit: The SmallRig is built around a full-size HDMI connection and lists a broad set of rig cameras; the Ricoh HC-1 is designed for the GR II specifically.
- Run length: The SmallRig is 35cm, suited to short rig runs. The supplied information does not state a length for the Ricoh HC-1, so measure your setup and check before ordering.
- Resolution: The SmallRig is rated to 4K at 60Hz under HDMI 2.0. The Ricoh HC-1 is described for full HD audio and video playback; no higher resolution is claimed in the supplied information.
- Connector clearance: The SmallRig's low-profile connectors are designed not to block adjacent ports. The Ricoh HC-1's connector dimensions are not confirmed in the supplied information.
- Best use: Choose the SmallRig for cages, gimbals, monitors, recorders and transmitters. Choose the Ricoh HC-1 when the job is getting GR II footage onto a larger screen.
A quick pre-order check
- Identify the port: Confirm whether your camera and target device use full-size HDMI. The SmallRig 2956B is specified for full-size HDMI connections.
- Measure the route: Run a string along the path the cable will take. If the route is short and contained, 35cm may be right; if it needs slack, account for that before choosing.
- Match resolution to the device: If you monitor or record in 4K, the SmallRig's HDMI 2.0 rating up to 4K at 60Hz is relevant. For GR II playback, the HC-1's full HD description matches that use.
- Check what is not stated: The supplied information does not confirm HDMI version, length or connector dimensions for the Ricoh HC-1. If those details decide your purchase, verify them first rather than assuming.


