Back to Blog
Buying Guides 2026-11-15 Harrison Cameras 1 views

Ricoh BJ-12 vs Hahnel Procube3: Charging GR IV Batteries

Ricoh BJ-12 vs Hahnel Procube3: Charging GR IV Batteries

Compare the Ricoh BJ-12 and Hahnel ProCube3 for GR IV battery charging. See which dual charger fits your kit, and where compatibility is not confirmed.

Two chargers, one is built for the GR IV

If you shoot with a Ricoh GR IV, the battery charger decision starts with compatibility. The Ricoh BJ-12 is the official accessory for GR IV batteries, while the Hahnel ProCube3 is a Fujifilm-type charger with a broader feature set. They are not interchangeable out of the box, and the supplied specifications do not confirm that the ProCube3 can charge GR IV batteries. That single fact should guide your choice before you compare slot counts or charging speed.

This comparison focuses on what the catalog evidence confirms about each charger, so you can match one to your camera and your shooting routine without guessing about compatibility.

What the catalog confirms about the Ricoh BJ-12

  • Ricoh BJ-12 Dual Battery Charger For GR IV: Official Ricoh accessory that charges two GR IV batteries simultaneously. This is the only charger in this comparison with confirmed GR IV compatibility, so it is the safe starting point for GR IV owners.
    Ricoh BJ-12 Dual Battery Charger For GR IV
    Ricoh BJ-12 Dual Battery Charger For GR IV
  • Ricoh BJ-12 Dual Battery Charger For GR IV: Dual-slot design with clear indicators to show battery status. Two slots let you replenish a spare while the camera is in use, and status indicators help you plan swaps during a shoot.
  • Ricoh BJ-12 Dual Battery Charger For GR IV: Compact and easy to use, positioned for travel, street photography, or long shoots. The GR IV is a pocketable camera, so a charger that travels easily matches how the camera is likely to be used.

What the catalog confirms about the Hahnel ProCube3

  • Hahnel Fujifilm Type Charger Procube3: Charges one or two Fujifilm camera batteries at the same time. The ProCube3 is a dual-battery charger for Fujifilm batteries, not a confirmed GR IV charger, so it suits a different camera system.
    Hahnel Fujifilm Type Charger Procube3
    Hahnel Fujifilm Type Charger Procube3
  • Hahnel Fujifilm Type Charger Procube3: USB Type-C PD 3.0 30-watt connectivity for fast power, with intelligent fast IC charging control. USB-C PD power is convenient for travel and modern power banks, but the supplied information does not confirm the required power adapter or cable.
  • Hahnel Fujifilm Type Charger Procube3: Integrated 2A USB-A port for charging additional devices, plus an AA battery tray that charges up to four AA batteries at once. These extras make the ProCube3 a multi-purpose power accessory, which may appeal if you already carry Fujifilm gear or AA-powered devices.
  • Hahnel Fujifilm Type Charger Procube3: A quick 15-minute charge provides approximately 150 photos per 300mAh added. This gives a concrete sense of top-up charging for Fujifilm batteries, but the figure is specific to that battery type and does not apply to GR IV batteries.

Where the two chargers actually differ

The meaningful differences are compatibility, battery type, and extra features. The BJ-12 is purpose-built for the GR IV; the ProCube3 is built around Fujifilm batteries and adds device charging and AA support.

  • Confirmed compatibility: Ricoh BJ-12: GR IV batteries. Hahnel ProCube3: Fujifilm camera batteries. GR IV compatibility for the ProCube3 is not confirmed by the supplied information.
  • Simultaneous charging: Both charge two camera batteries at once, but each is limited to its own battery type.
  • Power input: The ProCube3 specifies USB Type-C PD 3.0 30-watt connectivity. The supplied information for the BJ-12 does not list a power input or included power supply.
  • Extra outputs: The ProCube3 includes a 2A USB-A port and a tray for up to four AA batteries. The BJ-12 is listed only as a dual GR IV battery charger.
  • Status information: The BJ-12 has clear indicators for battery status. The ProCube3 has an LCD with charging information and a battery health indicator.

The compatibility question you should settle first

The Hahnel ProCube3 is described as a Fujifilm Type charger, and its supplied specifications refer to Fujifilm camera batteries. Nothing in the supplied record states that it accepts Ricoh GR IV batteries or that a GR IV plate is available. If you own a GR IV, that gap matters more than any feature comparison: an incompatible charger is not a bargain at any price.

The Ricoh BJ-12 avoids that question entirely because it is the official Ricoh accessory for the GR IV. If your priority is simply charging GR IV batteries with confirmed compatibility, the BJ-12 is the straightforward choice. If you also shoot Fujifilm, the ProCube3 may serve that system, but you would still need a separate solution for the GR IV unless compatibility is confirmed elsewhere.

How to choose based on your kit

  • You own a Ricoh GR IV and want a confirmed charger: Choose the Ricoh BJ-12 Dual Battery Charger. It is the official accessory, charges two GR IV batteries simultaneously, and has status indicators.
  • You own Fujifilm cameras and want a multi-purpose charger: The Hahnel ProCube3 is designed for Fujifilm batteries and adds USB-A device charging and AA battery support. Check that your specific Fujifilm battery model is supported before buying.
  • You own both systems: The supplied information does not confirm a single charger that covers both GR IV and Fujifilm batteries. You may need one charger per battery type.
  • You want the smallest travel kit: The BJ-12 is described as compact and easy to use. The ProCube3 offers more functions but is a larger, multi-purpose device; exact dimensions are not supplied for either charger.

What the supplied information does not confirm

For the Ricoh BJ-12, the catalog does not list charging time, power input, included cables, or a battery health indicator. For the Hahnel ProCube3, the catalog does not confirm GR IV compatibility, the exact Fujifilm battery models supported, or the required USB-C PD power adapter. It also does not state whether ProCube2 plates are included or sold separately, only that the charger is compatible with ProCube2 plates.

Treat those gaps as questions to check before you buy rather than as flaws. The confirmed facts are enough to make a safe choice for GR IV owners, and enough to see that the ProCube3 is a Fujifilm-focused charger with useful extras for the right photographer.

Related Articles

Customer Service
Home
Products
Cart
Profile